Falmec Stella 90/120 Ceiling Mounted Hood

Falmec Stella 90/120 Ceiling Mounted Hood

Availability: In stock

Size: 900/1200mm wide
Recessed Depth: Dependant upon motor selected – please refer to data sheet
White, Stainless Steel
4 Speeds
Electronic Control with Remote Control Included
800 - 1500m³/h Max (Dependant upon motor selected)
52 – 75dB(A) (Dependant upon motor selected)
LED Lighting 4000K (Dimmable for Ambient Lighting)
Leadtime: 1 – 3 weeks

£2,017.51 inc VAT


The Falmec Stella is a flush fitting, ceiling mounted hood which can be installed in either a recirculating or a ducted configuration.  It is available in a white or stainless steel finish, either 900mm or 1200mm wide If you are choosing a ducted installation, there are a variety of motor options available (diagrams are on the datasheet under the ‘Technical Info’ tab).  You can choose one of the following types;

  • Inline motor - slimline or standard motor installed either on top of the hood or along the duct run
  • External motor - motor installed vertically on an outside wall
  • Flat roof motor - motor installed externally on top of a flat roof

Inline and external motors are available in two capacities.  Choose the higher capacity motor for more complex or longer duct runs – if you are unsure, please contact us for details on 01892 600121. 

The Falmec Stella comes complete with LED lighting which can be dimmed to provide additional ambient lighting.  Air is extracted around the perimeter of the unitand it comes complete with a remote control.  If you are choosing a recirculating installation you will also need to purchase Falmec’s revolutionary Carbon.Zeo filter kit – KACL.939#BF – for use with the slim motor.

Carbon.Zeo Filtering Technology (Recirculating Installation Only) – Up to 86% reduction in cooking odours

The exclusive Falmec Carbon.Zeo combined filter utilises materials found in nature and capitalises on their ability to reduce both cooking odours and moisture.  The filter has a long life - approximately 3 years with regular use.  It is designed to be regenerated every 18 months, by placing it in the oven at 200⁰C for two hours and must be replaced after three years.

Additional Information

Additional Information

Colour Stainless Steel
Brand Falmec
Extractor Version Ducted or Recirculating
Guarantee No
Colour Stainless Steel
Control Options Electronic Control with Remote Control Included
Dimension 973 x 540 x 367mm Max
Hood Width (mm) 900mm
Cooker Hood Weight 31kg
Fan Style Ceiling Mounted
Hood Lighting LED 4 x 3.6W - 4000K
Performance 1100m³/h Max
Energy Class Not Stated
Connected Load (Watts) 570W
Min Height from Gas Hob 150cm
Min Height from Induction Hob 150cm
Room Type Kitchen
Sound 53 - 69 dB(A)
Filter Type Metallic Grease filters with Optional Carbon.Zeo filters for Recirculating Installation)
Spigot Dimension 150mm
Technical Info