VETO Quick Links
The WRENCHER-LC is the large-sized open top plumbing bag
All WRENCHER bags feature a water-repelling tarpaulin interior for easy clean up, and an injection moulded waterproof base
Compact tool backpack tool bag designed for Technicians that need to ”hands-free” carry a minimum amount of tools and test meters for service calls and minor installs. This is perfect for mobile tool storage
The TECH-TT provides two exterior ‘shop walls’ of tool storage along with open access to all interior tool pockets – keeping gear visible and accessible. Built on a waterproof plastic base the TECH-TT is designed for any tradesperson or technician to quickly store hand tools in vertical pockets as well as larger tools in the centre bulk storage section of the bag. The two removable V-SWAP™ pocket panels are included with your purchase and enable customizing the interior for creating more or less bulk storage capacity. You may purchase additional panels as you like to accommodate more arrangements. A tape measure, small driver or Veto pouch can attach to the stainless mounting clip.
Featuring 10 pockets of various sizes to accommodate a meter and a few of the most commonly used tools on diagnose, repair or service calls. This is a convenient small tool storage option.
When not in use it can clip onto any model Veto bag’s tape clip or D-Rings.
Semi-rigid exterior with moisture resistant back Removable tool pouch with 6 pockets, stainless tape measure clip, 2 D-rings, and magnetic flap for securing to a waist belt or trouser pocket Front external sleeve pocket for attaching removable tool pouch and sized for storing a smart phone Included Double-Gated Carabiner for hanging case while open or closed Wire-formed & nylon plastic belt clip V-SWAP™ removable tool pocket panel with 3 internal pockets designed to store a pocket knife, penlight, an pen or pencil Internal smart phone storage pocket with extra padding and anti-scratching material Internal elastic strap for storing a small notepad YKK® zippers
one-sided closable mid-sized tool pouch. Holds a variety of tools, meters, fasteners and wire nuts
Tablet pocket on the backside to help Technicians needing a compact tool storage bag for a variety of service calls and installs.
Compact, Yet Fully Featured Service, Repair or Install Tool Bag
Features Veto Pro Pac’s patented centre panel, heavy duty construction and stabilizing injection moulded waterproof base that keeps tools dry, even in the nastiest of conditions.
The TR-LC is a highly functional, large modular tool roll designed for job sites and roadside repairs. It features a mountable design with a hanging hook to keep it off the ground and out of the mud. This large tool roll is easily carried with an ergonomic grip handle and a shoulder strap when rolled up, and two secondary handles for quick transport when unrolled. The TR-LC includes five removable storage pouches and rolls: three multi-colored large bulk storage pouches (“RP-LCs”) designed to contain items while hanging; a wrench roll (“WR-LC”) for a full wrench set, and a socket roll (“SR-LC”) for a full socket set. Both the WR-LC and SR-LC also function as standalone rolls with external zippered pockets and carrying handles. The RP-LCs, WR-LC, and SR-LC utilize heavy duty Velcro to ensure a secure attachment and easy detachment on the inside of the TR-LC so that you can grab them and go as you need.
A string of magnets added long the back of this pair of 8″/20cm long parts bags adds a surprising amount of functionality. Not only do the magnets enable the pair to secure to one another, each magnetized pouch can attach to the ferrous mounting point integrated in the TP-XXL, TP-XD & TP-XL. When on the go the pouches can secure themselves to a substructure keeping small parts, test leads or precision tools within hand’s reach. The magnets can also temporarily keep the screws from a removed shroud in place.
Organised and Compact. The OC Cases are an ideal add-on for our larger tool bags or as a stand-alone storage solution. Designed for versatility, each case provides a semi-rigid protective shell for specialised tools & electronics.
With a total of 8 secured storage compartments, the CP5 and included dual-zippered pouch is a versatile system for storing and protecting an assortment of tools and gear. The CP5 adds greater capacity and functionality to our long-time workhorse, the CP4 “Grubber™.” These rugged pouches are multi-purpose for grab & go quick service or repair jobs.
Multi-Purpose tool pouch for holding a variety of small tools, accessories and small items.
Can clip keychains and other items to the D-rings or other Veto bags
The TP-XXL INFRARED is a closable mid-sized tool pouch in a new black and red color scheme. It is identical to other TP-XXL colorways and includes integral side-mounted padded pockets for separate meter or tool storage. The bag also features an external daisy chain for attaching pouches and accessories. The TP-XXL INFRARED also includes our proprietary V-SWAP™ system of interchangeable panels.
THE TP-XXL INFRARED BAG COMES WITH THE REAR TOOL PANEL, THE FRONT TOOL PANEL, AND THE 2-BIT & 4-BIT PANEL.
The MB5B SPECIAL OPS is a extra large and highly-configurable front accessed meter bag in a black and hi-viz yellow colorscheme. Once the bag is loaded out, it can be worn over both shoulders using the included backpack straps, over a single shoulder using the optional padded shoulder strap, or at your side with over-molded gripped handle. Finally, the bag features an additional 8 pockets on the front flap as well as a padded tablet computer pocket on the back. The MB5B SPECIAL OPS stores a variety of hand tools inside the bag while separately storing 1-2 clamp meters in the 2 padded side mounted zippered pockets. The MB5B SPECIAL OPS edition COMES WITH THE LARGE SIDE POCKET INSERTS, THE FRONT TOOL PANEL, AND THE REAR TOOL PANEL, ALL AS SHOWN BELOW. Additional panels are available and sold separately.
The MB5B INFRARED is an extra-large, highly configurable front-access meter bag in the new black and red color scheme. It features an external daisy chain for attaching pouches or accessories. The bag can be worn over both shoulders with the included, removable backpack straps, over one shoulder with the optional padded shoulder strap, or at your side with the over-molded gripped handle. The outside of the bag includes 8 pockets on the front flap and a padded tablet computer pocket on the back. The MB5B INFRARED also features our proprietary V-SWAP™ system of interchangeable panels, allowing you to customize the internal storage layout.
• Holds up to 12 16oz/473ml beverage cans OR 12 12oz long neck bottles OR 16 12 oz cans • Zipperless air-tight access with magnetic latch • 300in3/5 liters of addtional storage in lid • 6 exterior pockets • Injection molded removable liner • Rigid foam insulation • Removeable Dry Storage Tray • Zippered exterior pocket • Removable carrying handle & shoulder strap • Reflective accents for safety • Over-molded TPR rubber waterproof polypropylene base • 5-Year limited warranty
Tall version of the MB tool bag to hold taller meters, analysers and repair tools.Available in ‘Camo’ fabric design.
Great ‘grab and go’ bag for job specific tools and call outs.
The NORWALK 20L BACKPACK, part of the NORWALK BY VETO lifestyle collection, blends durability, versatility, and sleek design, making it your companion for the commute, gym, travel, and everything in between. Crafted with the same attention to detail you know from VETO, this bag features recycled, water-resistant materials and a rugged tarpaulin base. With a padded laptop compartment, unique zippered magnetic side pockets that hold 40 oz bottles, antNORWAi-scratch protection, reflective accents, and a spacious interior, the NORWALK 20L BACKPACK keeps your essentials organized and secure for life on the go.
17 internal and external pockets
Stainless tape clip
2.5” wide belt slot
Rbc (repositionable belt clip)
Rear molle accepts included rbc for attaching
To belt or tool bag
4 d-rings
Detachable rubber handle
Pass-through drill holster compartment
Drill holster fastening strap
Front flap pouch with bit pockets
Soft-sided synthetic rubber-lined base
Allows the pouch to stand up on its own
5 year warranty
The WRENCHER-XL is the extra-large sized open top vertical tool storage bag
All WRENCHER bags feature a water-repelling tarpaulin interior for easy clean up, and an injection moulded waterproof base
The HOSE HAULER BLACKOUT is a “blacked-out” version of the existing HOSE HAULER with a few added features. It includes a “suitcase-like” expansion feature that increases internal capacity, allowing you to fit more hoses, store a refrigerant scale with your hoses and gear, or hold up to 100 feet of extension cord. Inside, a removable security strap keeps hoses or extension cords fastened and prevents them from unravelling. The bag also features three removable zippered pouches—two corner pouches and one centre pouch—for storing tools and equipment. The flap includes a dual-zippered 2-in-1 pocket that opens from the top or bottom. On the outside, there is an added hanging hook for mounting the bag and a shoulder strap for easy transport. This is the ultimate bag for hoses, extension cords, and recovery or evacuation kits.
The TECH-LCT BLACKOUT is a “blacked-out” closed top tool bag designed to accommodate technicians’ tools and work routines. This weatherproof, large-sized service technician’s tool bag organizes, stores and protects hand tools and meters, making service calls or system installs quicker and more efficient. The TECH-LCT BLACKOUT tool bag sports up to 55 interior and exterior pockets with ample room for hand tools, parts boxes, meter, a cordless impact drill and other bulkier items. The TECH-LCT BLACKOUT features our V-SWAP™ system, allowing for customization of the interior pocket layout by simply swapping panels for different storage layouts. Standing at 15″ tall, this bag is great for tradespeople who want to store large tools and equipment in a closed-top tool bag.
The TP-XXL SPECIAL OPS is a closable mid-sized tool pouch in a new black and Hi-Viz yellow colour scheme. It is identical to other TP-XXL bags and includes integral side-mounted padded pockets for separate meter or tool storage. The TP-XXL SPECIAL OPS also features our proprietary V-SWAP™ system of interchangeable panels so you can create multiple configurations based upon your needs. The TP-XXL SPECIAL OPS edition comes with the V-SWAP Front Panel, V-SWAP Tool Panel, and the V-SWAP 2-Bit @ 4-Bit Pocket Panels. Additional panels are available and sold separately.
Designed as an everyday carry backpack, the EDC PAC LCB inherits its D.N.A. from Veto Pro Pac’s always dependable TECH PAC backpack tool bag. Just like the TECH PAC, the EDC PAC LCB is built with durability and stability in mind. A waterproof injection molded polypropylene base and rugged body structure provide allow the EDC PAC LCB to stand up-right just like the professional backpack toolbag. Up front is a vast, open compartment perfect for supplies, gear and other everyday essentials. A separate semi-rigid zippered compartment at the top is designed for protecting sunglasses or safety glasses. Two additional zippered front pockets offer several organizational compartments for technology or personal items. In back is a dedicated 15″ laptop compartment with a padded tablet sleeve. Large, zippered side pockets expand to accommodate large water bottles or can remain zipped tight for securing any other daily needs. Finally, like all Veto bags, the EDC PAC LCB features a familiar solidly attached haul handle to confidently grab when it’s time to bug out.
