VETO Quick Links
The TECH PAC WHEELER BLACKOUT is a rolling version of the best-selling TECH PAC BLACKOUT backpack tool bag with an all-black colour scheme. This wheeled backpack includes new premium padded backpack straps that are completely removable. This makes stowing the backpack straps easier and allows you to choose whether the bag can function as a backpack or not. The TECH PAC WHEELER BLACKOUT also features the V-SWAP system. Includes the Tool Panel (included and mandatory) and Meter Panel.
The TECH PAC MC WHEELER BLACKOUT is a medium-sized rolling tool backpack with an all-black color scheme inspired by the TECH PAC MC BLACKOUT. This wheeled backpack includes new premium padded backpack straps that are completely removable, making the backpack straps easier to stow and decide whether or not to carry as a backpack. The TECH PAC MC WHEELER BLACKOUT also features our proprietary V-SWAP™ system of interchangeable panels. Includes the Tool Panel (included and mandatory) and Meter Panel.
The HOSE HAULER BLACKOUT is a “blacked-out” version of the existing HOSE HAULER with a few added features. It includes a “suitcase-like” expansion feature that increases internal capacity, allowing you to fit more hoses, store a refrigerant scale with your hoses and gear, or hold up to 100 feet of extension cord. Inside, a removable security strap keeps hoses or extension cords fastened and prevents them from unravelling. The bag also features three removable zippered pouches—two corner pouches and one centre pouch—for storing tools and equipment. The flap includes a dual-zippered 2-in-1 pocket that opens from the top or bottom. On the outside, there is an added hanging hook for mounting the bag and a shoulder strap for easy transport. This is the ultimate bag for hoses, extension cords, and recovery or evacuation kits.
The TECH PAC SPECIAL OPS is a black and HI-VIZ yellow version of the TECH PAC BLACKOUT. The bag features Veto Pro Pac’s proprietary V-SWAP™ system and includes the Tool Panel and Meter Panel (see below). Additional panels are sold separately and swapped out enabling tool, gear or job specific storage solutions.
The MP3X is a medium-sized tool pouch with both a leather Back Pocket Stuffer™, that easily slips into pants pockets for a quick retrieval, and a wire-formed clip for securing to belts and Veto tool bags. Ideal for a minimum amount of electrical or networking tools, the MP3X features 8 main pockets sized for linesmen, needle nose or snips or drivers. A pair of thru-pockets on each side accommodate long shank or handled tools and 4 pen-sized pockets complete the sides of the pouch. The MP3X is topped off with a flush mounted stainless steel clip providing a durable connection point for hanging tools.
The MPMX is a medium-sized tool pouch with both a leather Back Pocket Stuffer™, that easily slips into pants pockets for a quick retrievel, as well as wire-formed clip for securing to belts and Veto tool bags. Ideal for electrical testing the MPMX features a large main pocket in the center designed for storing a multi-meter (most sizes). A pair of thru-pockets on each side accommodates long shank or handled tools and 4 pen-sized pockets complete the sides of the pouch. The MPMX is topped off with a flush mounted stainless steel clip providing a durable connection point for hanging tools.
Tall version of the MB tool bag to hold taller meters, analysers and repair tools.
Great ‘grab and go’ bag for job specific tools and call outs.
Multi-Purpose tool pouch for holding a variety of small tools, accessories and small items.
Can clip keychains and other items to the D-rings or other Veto bags
Multi-Purpose tool pouch for holding a variety of small tools, accessories and small items.
Can clip keychains and other items to the D-rings or other Veto bags
The TP-LD BLACKOUT is a one-sided, closable large service technician tool pouch that can store meters, small hand tools, fasteners and wire nuts, etc. Sporting a extra-deep 8.5″ injection molded base to prevent the bag from tipping over and our V-SWAP™ system, allowing for customizing the interior pocket layout. The TP-LD BLACKOUT comes with the V-SWAP Rear 9-Pocket Panel and the V-SWAP Front Tool Panel. You may purchase additional panels below to offer a variety of configurations. This bag is great for technicians needing a versatile and compact tool storage bag for keeping a variety of service-oriented tools out of the weather and protected. This bag features our stealth all black color pattern.
The HOSE HAULER is a versatile storage solution that is specifically designed with HVAC technicians and plumbers in mind. It can store vacuum pump hoses, micron gauges, valve core removers, adapters, a bottle of vacuum pump oil and basic hand tools needed for performing an evacuation on an HVAC system. The HOSE HAULER features a removable interior pouch and 2 removable storage dividers, allowing for customization of the interior storage layout. The bag also features a water/oil resistant interior for easy clean up.
Dedicated open-top tool storage section for quick and easy
Access to tools
Closed-top meter/tester storage section w/ v-swap™ panel
Waterproof polypropylene plastic base for moisture and
Abrasion protection
1 tape loop
27 total exterior and interior pockets
1 stainless tape clip
“hang-up” hook
Tarpaulin covered rear pocket for added weather and
Abrasion protection
Detachable over-molded elastomeric grip handle
Ykk® zippers
V-swap™ removable tool pocket panel system
17 internal and external pockets
Stainless tape clip
2.5” wide belt slot
Rbc (repositionable belt clip)
Rear molle accepts included rbc for attaching
To belt or tool bag
4 d-rings
Detachable rubber handle
Pass-through drill holster compartment
Drill holster fastening strap
Front flap pouch with bit pockets
Soft-sided synthetic rubber-lined base
Allows the pouch to stand up on its own
5 year warranty
The TECH-MC BLACKOUT is a stealth version of our compact (2 inches shorter than the TECH-MCT), full-featured service, repair or installation tool bag that features everything you have come to expect from Veto Pro Pac: patented center panel, heavy duty construction and stabilizing injection molded waterproof base that keeps tools dry even in wet conditions. With 38 pockets, two storage bays and 10.5” (27cm) of vertical interior storage space, this bag offers maximum storage for hand tools, meters and cordless drills in the MC platform. The TECH MC BLACKOUT includes D-rings, bit extension and memory stick pockets, and a stainless steel tape clip as well as a quick access outside pocket for drill bit extensions and small items. Featuring Veto Pro Pac’s proprietary V-SWAP™ system. Alternative tool pocket panels are available separately and can be swapped-out enabling tool, gear or job specific storage solutions.
Veto’s lunchbox-sized cooler safely keeps the critical items that power your day. The hybrid design melds the functional appearance of a soft-sided lunch bag with the performance of a hard-sided cooler. Secured via magnetic latch, the zipperless lid can be easily opened with one hand when on the road. The LBC-10 offers significant internal volume insulated by 1” (2.5cm) of rigid, expanded polypropylene foam. The injection molded polypropylene plastic liner is easily removed for rinsing out spilled liquids. An included interior tray keeps small items and cutlery separate and accessible, can be slid left or right, or can be removed to accommodate larger meal items. The bag exterior features a zippered front pocket for storing everyday carry needs. Additional features include an over-molded elastomeric/polypropylene waterproof LC base and a reflective band around the perimeter.
Veto’s lunchbox-sized cooler safely keeps the critical items that power your day. The hybrid design melds the functional appearance of a soft-sided lunchbag with the performance of a hard-sided cooler. Secured via magnetic latch, the zipperless lid can be easily opened with one hand when on the road. The LBC-10 offers significant internal volume insulated by 1” (2.5cm) of rigid, expanded polypropylene foam. The injection molded polypropylene plastic liner is easily removed for rinsing out spilled liquids. An included interior tray keeps small items and cutlery separate and accessible, can be slid left or right, or can be removed to accommodate larger meal items. The bag exterior features a zippered front pocket for storing everyday carry needs. Additional features include an over-molded elastomeric/polypropylene waterproof LC base and a reflective band around the perimeter. Note: Ice Pack not included.
Additional panel for Veto Tech-LCT Blackout to allow customisable bag.
Additional panel for Veto Tech-LCT Blackout to allow customisable bag.
A compact open-top tool bag with an internal plastic box, housing a repositionable insert box that allows you to customize your tool storage space options.
The TECH OT-MD Blackout tool tote also features multiple vertical tool pockets for quick & easy access.
