Veto Pro Pac Maintenance / Repair / Installation

Designed as an everyday carry backpack, the EDC PAC LCB inherits its D.N.A. from Veto Pro Pac’s always dependable TECH PAC backpack tool bag. Just like the TECH PAC, the EDC PAC LCB is built with durability and stability in mind. A waterproof injection molded polypropylene base and rugged body structure provide allow the EDC PAC LCB to stand up-right just like the professional backpack toolbag. Up front is a vast, open compartment perfect for supplies, gear and other everyday essentials. A separate semi-rigid zippered compartment at the top is designed for protecting sunglasses or safety glasses. Two additional zippered front pockets offer several organizational compartments for technology or personal items.  In back is a dedicated 15″ laptop compartment with a padded tablet sleeve. Large, zippered side pockets expand to accommodate large water bottles or can remain zipped tight for securing any other daily needs. Finally, like all Veto bags, the EDC PAC LCB features a familiar solidly attached haul handle to confidently grab when it’s time to bug out.

The TP6B is a one-sided, open top compact-sized tool pouch that holds a variety of tools, meters, fasteners & wire nuts.  The exterior pockets include a weather resistant rear storage area ideal for sensitive probes.  The TP6B features a wide open interior that can be reconfigured via the removable V-SWAP tool panel featuring 3 pockets and a n elastic tension strap.  Remove the V-SWAP panel to gain more bulk storage capacity for larger items or parts boxes.  The TP6B is for techs needing a compact bag for service calls requiring just the minimum amount of tools.

Organised and Compact.  The OC Cases are an ideal add-on for our larger tool bags or as a stand-alone storage solution.  Designed for versatility, each case provides a semi-rigid protective shell for specialised tools & electronics.

The TP-XXL BLACKOUT is a closable extra-large tool pouch designed with integral side mounted padded meter pockets. Each zippered meter pocket will securely fit meters up to 10″ (260mm) x 3.5″ (90mm) x 2″ (50mm). The all-black tactical construction of the BLACKOUT edition discretely conceals additional V-SWAP capabilities. V-SWAP panels inside the TP-XXL BLACKOUT enable the removal of all internal pockets to create a custom layout, easy clean-out and/or the storing of larger equipment in addition to a variety of tools, meters, fasteners, small tablet computer.  The TP-XXL BLACKOUT edition comes with the V-SWAP Front Tool Panel, V-SWAP Rear Tool Panel, and the V-SWAP 2-Bit @ 4-Bit Pocket Panels.

With a total of 8 secured storage compartments, the CP5 and included dual-zippered pouch is a versatile system for storing and protecting an assortment of tools and gear. The CP5 adds greater capacity and functionality to our long-time workhorse, the CP4 “Grubber™.” These rugged pouches are multi-purpose for grab & go quick service or repair jobs.

Large main pocket with 2 padded interior pockets ideal for protecting 1 - 4 meters

13 available pockets ideal for wireless probes and small small hand tools

The MB4B is a unique and versatile vertically oriented tool carrying solution. Designed for efficiency, the MB4B’s gate mouth style zippered opening enables quick and unencumbered access to the inside of the bag. Wear the MB4B over both shoulders using the included backpack straps, over a single shoulder via the optional padded shoulder strap, or at your side with the leather-gripped handles. The divider inside the removable padded insert box can be repositioned to secure and separate a meter from other tools; three internal pockets enable further partitioning of tools. Finally, the bag features 11 exterior pockets on the side and front as well as a padded tablet computer pocket on the back.

The MB5B Tester Bag is designed for a Multifunction Tester (MFT) and is an extra large and highly-configurable front accessed meter bag. Once the bag is loaded out, it can be worn over both shoulders using the included backpack straps, over a single shoulder using the optional padded shoulder strap, or at your side with over-molded gripped handle. Finally, the bag features an additional 8 pockets on the front flap as well as a padded tablet computer pocket on the back. The MB5B is offered in two configurations: one for technicians in the United States and one for technicians in the UK, Europe and the rest of the international professional trade community.

A string of magnets added long the back of this pair of 8″/20cm long parts bags adds a surprising amount of functionality. Not only do the magnets enable the pair to secure to one another, each magnetized pouch can attach to the ferrous mounting point integrated in the TP-XXL, TP-XD & TP-XL. When on the go the pouches can secure themselves to a substructure keeping small parts, test leads or precision tools within hand’s reach. The magnets can also temporarily keep the screws from a removed shroud in place.

The MB5B Tool Bag is an extra large and highly-configurable front accessed tool and meter bag. Once the bag is loaded out, it can be worn over both shoulders using the included backpack straps, over a single shoulder using the optional padded shoulder strap (sold separately), or at your side with over-moulded gripped handle. The bag features an additional 8 pockets on the front flap as well as a padded tablet computer pocket on the back.

Compared to the LBC-10, the larger LBC-15 lunchbox-sized cooler provides an additional 305in3/5 liters of non-insulated storage within the lid. Unzip either side of the lid to slide out an injection molded plastic storage drawer; or remove completely to use as an eating tray. The LBC-15 also includes 6 additional exterior everyday carry storage pockets around the perimeter of the bag, including a pocket perfect for an eReader or small tablet computer.

• Holds up to 12 16oz/473ml beverage cans OR 12 12oz long neck bottles OR 16 12 oz cans • Zipperless air-tight access with magnetic latch • 300in3/5 liters of addtional storage in lid • 6 exterior pockets • Injection molded removable liner • Rigid foam insulation • Removeable Dry Storage Tray • Zippered exterior pocket • Removable carrying handle & shoulder strap • Reflective accents for safety • Over-molded TPR rubber waterproof polypropylene base • 5-Year limited warranty

5 year warranty

The HOSE HAULER is a versatile storage solution that is specifically designed with HVAC technicians and plumbers in mind. It can store vacuum pump hoses, micron gauges, valve core removers, adapters, a bottle of vacuum pump oil and basic hand tools needed for performing an evacuation on an HVAC system. The HOSE HAULER features a removable interior pouch and 2 removable storage dividers, allowing for customization of the interior storage layout. The bag also features a water/oil resistant interior for easy clean up.

The TECH-LCT BLACKOUT is a “blacked-out” closed top tool bag designed to accommodate technicians’ tools and work routines. This weatherproof, large-sized service technician’s tool bag organizes, stores and protects hand tools and meters, making service calls or system installs quicker and more efficient. The TECH-LCT BLACKOUT tool bag sports up to 55 interior and exterior pockets with ample room for hand tools, parts boxes, meter, a cordless impact drill and other bulkier items. The TECH-LCT BLACKOUT features our V-SWAP™ system, allowing for customization of the interior pocket layout by simply swapping panels for different storage layouts. Standing at 15″ tall, this bag is great for tradespeople who want to store large tools and equipment in a closed-top tool bag.

The TECH OT-LC BLACKOUT is an all black, large capacity wide open tote with our V-SWAP™ system of removable/swappable panels, and additional open space that can be reoriented to accommodate multiple tools and gear for a variety of tasks. An integral structural box features a repositionable insert box and magnetic lid functioning as both storage for small items or as a partition and includes 2 plastic partitions for further customization of the center box. The TECH OT-LC BLACKOUT comes with the 10 pocket panel and 15 pocket panel, as well as with the Bulk Storage panel. Additional panels, insert boxes and partitions are available and sold separately.

The TECH-MC BLACKOUT is a stealth version of our compact (2 inches shorter than the TECH-MCT), full-featured service, repair or installation tool bag that features everything you have come to expect from Veto Pro Pac: patented center panel, heavy duty construction and stabilizing injection molded waterproof base that keeps tools dry even in wet conditions. With 38 pockets, two storage bays and 10.5” (27cm) of vertical interior storage space, this bag offers maximum storage for hand tools, meters and cordless drills in the MC platform. The TECH MC BLACKOUT includes D-rings, bit extension and memory stick pockets, and a stainless steel tape clip as well as a quick access outside pocket for drill bit extensions and small items. Featuring Veto Pro Pac’s proprietary V-SWAP™ system. Alternative tool pocket panels are available separately and can be swapped-out enabling tool, gear or job specific storage solutions.

A compact open-top tool bag with an internal plastic box, housing a repositionable insert box that allows you to customize your tool storage space options. 

The TECH OT-MD Blackout tool tote also features multiple vertical tool pockets for quick & easy access.